Motor mount

94integraguy · 03/09/2010, 03:28 PM

Ok i just put in a jdm b20b into my integra and the driver side motor mount is different on the motor of the b20b than it was on the integra so do i need to get a crv motor mount or is there a way to use the integra one if anyone could help out that would be great.

Civic9390 · 03/09/2010, 09:37 PM

does your bracket on your motor have 3 studs or 2?

94integraguy · 03/09/2010, 11:51 PM

It has two studs and the mount has three.

94integraguy · 03/10/2010, 08:14 PM

K guys need help on the i cant find a mount of a crv that works on the integras. So need help on what one i should use.

turborex · 03/10/2010, 11:15 PM

take the whole driver side mount off your integra block even including the one off the block and switch it over to the crv b20 and use your stock integra motor mounts

use the obd1 LS 240cc injectors and manifold( unless you have the crv short intake manifold)

Reuse your stock intermediate shaft and R+L axles

use the obd1 T-bracket and rear mount. everything else is plug and play, all the extra sensors on the block you wont need. Just all the sensors that are on the engine harness since your running a OBD1 p75 ecu. TAAA DAAHHHHH!

Dizzy you might be able to use your stock distributor or you can cut, splice, and solder or just get a jumper harness

94integraguy · 03/10/2010, 11:23 PM

Well I would do that but i sold my ls block. So i dont have that anymore. So IS there a mount out there that will work. For it

nate2k5 · 03/10/2010, 11:53 PM

you need an integra mount, the entire thing.

94integraguy · 03/10/2010, 11:57 PM

Ok I have the integra mount. your saying i need the part on the block. I got that but i want to know if there is a another car mount that might work. I have been looking at the 94 ex civic ones and they look like they would work.

heeltoehonda · 03/11/2010, 09:48 AM

I'm don't think a d-series mount will work, your going to need one off a b-series.

gabebauman · 03/11/2010, 10:37 AM

You need the engine mount bracket. I might have one in my parts bin.

Basically...the bracket you need has the two mount studs in a straight line where-as the b20 mount studs are off set correct?

Integra Mount Bracket

B20 Mount Bracket look like this?

94integraguy · 03/11/2010, 11:27 AM

I know i went to wrench n go to day and got a 95 civic driver side mount and it works on the b20b just fine. And i got one of the integra brackets y i was there to.

03/09/2010, 03:28 PM	#1
94integraguy JDM Lover Join Date: Jan 2010 Location: Indianola Posts: 64	Motor mount Ok i just put in a jdm b20b into my integra and the driver side motor mount is different on the motor of the b20b than it was on the integra so do i need to get a crv motor mount or is there a way to use the integra one if anyone could help out that would be great.

03/09/2010, 09:37 PM	#2
Civic9390 JDM Soldier Join Date: Apr 2008 Location: Linn county, Iowa Posts: 325	Re: Motor mount does your bracket on your motor have 3 studs or 2? __________________ Try advancing your brain a few degrees, because it is definitely too far retarded... You're lucky that double shot of bbq sauce didn't blow the seam on your nugget box!!!

03/09/2010, 11:51 PM	#3
94integraguy JDM Lover Join Date: Jan 2010 Location: Indianola Posts: 64	Re: Motor mount It has two studs and the mount has three.

03/10/2010, 08:14 PM	#4
94integraguy JDM Lover Join Date: Jan 2010 Location: Indianola Posts: 64	Re: Motor mount K guys need help on the i cant find a mount of a crv that works on the integras. So need help on what one i should use.

03/10/2010, 11:15 PM	#5
turborex JDM Knight Join Date: Mar 2007 Location: Storm lake I OWE YA Posts: 659	Re: Motor mount take the whole driver side mount off your integra block even including the one off the block and switch it over to the crv b20 and use your stock integra motor mounts use the obd1 LS 240cc injectors and manifold( unless you have the crv short intake manifold) Reuse your stock intermediate shaft and R+L axles use the obd1 T-bracket and rear mount. everything else is plug and play, all the extra sensors on the block you wont need. Just all the sensors that are on the engine harness since your running a OBD1 p75 ecu. TAAA DAAHHHHH! Dizzy you might be able to use your stock distributor or you can cut, splice, and solder or just get a jumper harness __________________ 1993 Honda Civic Hatch DX jdm Single Turbo-daily 2002 Acura Rsx Type S-Sweet RidE 2009 Kawasaki Ninja 600- Summer Bike 1995 Acura Integra SE

03/10/2010, 11:23 PM	#6
94integraguy JDM Lover Join Date: Jan 2010 Location: Indianola Posts: 64	Re: Motor mount Well I would do that but i sold my ls block. So i dont have that anymore. So IS there a mount out there that will work. For it

03/10/2010, 11:53 PM	#7
nate2k5 Human Bean Join Date: May 2007 Location: Iowa City, IA Posts: 3,530	Re: Motor mount you need an integra mount, the entire thing. __________________ 1997 Ford Explorer 5.0 AWD 1992 BMW 325i M3/4/5 Replica CHECK YOSELF BEFORE YOU WRECK YOSELF

03/10/2010, 11:57 PM	#8
94integraguy JDM Lover Join Date: Jan 2010 Location: Indianola Posts: 64	Re: Motor mount Ok I have the integra mount. your saying i need the part on the block. I got that but i want to know if there is a another car mount that might work. I have been looking at the 94 ex civic ones and they look like they would work.

03/11/2010, 09:48 AM	#9
heeltoehonda JDM Knight Join Date: Mar 2009 Location: DSM, IA Posts: 825	Re: Motor mount I'm don't think a d-series mount will work, your going to need one off a b-series. __________________ 94 Si

03/11/2010, 10:37 AM	#10
gabebauman DR. DIY Join Date: Feb 2007 Location: DSM, IA Posts: 3,243	Re: Motor mount You need the engine mount bracket. I might have one in my parts bin. Basically...the bracket you need has the two mount studs in a straight line where-as the b20 mount studs are off set correct? Integra Mount Bracket B20 Mount Bracket look like this? __________________ Dude!...Are you Gabe Bauman?. FOR SALE>>>>>>>>>> http://www.jdmcity.com/showthread.php?t=3858 I cut holes in fenders...pm me.

03/11/2010, 11:27 AM	#11
94integraguy JDM Lover Join Date: Jan 2010 Location: Indianola Posts: 64	Re: Motor mount I know i went to wrench n go to day and got a 95 civic driver side mount and it works on the b20b just fine. And i got one of the integra brackets y i was there to.