the nissan picture thread - Page 10

booey13 · 07/26/2010, 03:53 PM

Thanks guys. Yes they are battles and theyre currently not for sale. Actually just put the fogs on to try them out, I was trying to find an OEM set but that's damn near impossible. Yes they're thte cheap ones and they flop around but I don't mind them. They'll probably come off when I get a lip if I can't stiffen them up or find a clean set of the OEM's. I'm not counting on that tho... It scrapes just about everywhere I go but I have a skid plate so it's all cool. I unfortunately have to keep my car at this height...I'm terrified of heights.

Oh, and the car DEFINITELY needs a spacer in the rear.

rocko · 07/26/2010, 03:56 PM

^^^darn o well where did you pick them up from.

booey13 · 07/26/2010, 03:58 PM

I got mine from wheel trends, you can get them from a few different places. Discount tire should have them also.

rocko · 07/26/2010, 04:03 PM

K thanks

Dj Technick · 07/26/2010, 04:39 PM

I think you need to lower your car more.

booey13 · 07/26/2010, 05:10 PM

Agreed. Just a hair in the front

Kyleakahalo · 07/27/2010, 11:33 AM

Quote:

Originally Posted by booey13

Agreed. Just a hair in the front

i think you should rim tuck in the back...... lol

booey13 · 07/27/2010, 12:45 PM

I'm on it

booey13 · 07/28/2010, 09:09 AM

My bro's s14. 18X10 +3 up front. Rears are in the works

MDM · 07/28/2010, 10:46 PM

Damn. Who mounted those tires most places around here wont. Shit looks sick.

booey13 · 07/28/2010, 11:18 PM

Toro tires stretched them. They pull prices out of their ass though...I've had them done anywhere form $5 to $20. Guess it depends on who's working that day. You could probably get 4 tires done for a case of beer

jdmb18hatch · 07/29/2010, 09:37 PM

Quote:

Originally Posted by zippakilla

the switches were needed as my ignition switch was grounding out. So all in all it is for functionality of the vehicle. AS FOR THE RICE BOX COMMENT I SWEAR TO GOD I AM GOING TO KICK YOU IN THE BALLS THE NEXT TIME I SEE YOU. lol

So did you ever figure out the actual cause of the faulty ignition or just add switches as a band aid? I'm not hating in any way, just curious.

zippakilla · 08/01/2010, 07:31 PM

No actually I did track down what was going on and the switch was PART of a HUGE clusterfuck of a problem.

1 The switch was grounding out creating a draw
2 The fans were wired into the IGN coil 12 v wire.

Draw plus too much current through one wire. Wires no longer heat up. Just wish I had the brake master cylinder reservoir seal for the bottom of it. Trying to volunteer to go overseas to get outa here so the rides might be up for grabs . ... we'll see.

KoukiDrifters14a · 08/08/2010, 10:31 AM

My s14a
http://www.facebook.com/photo.php?pi...25976854091360
http://www.youtube.com/watch?v=7lXNoQxM2wM

KoukiDrifters14a · 08/08/2010, 10:51 AM

Guess i'm the First With a BOOSTED S14a on JDMCIty then :)

KoukiDrifters14a · 08/08/2010, 11:23 AM

Guess i'm the First With a BOOSTED S14a on JDMCIty then :)

Kyleakahalo · 08/18/2010, 05:58 PM

booey13 · 08/18/2010, 06:32 PM

I hope there's a 180 front goin on that mystery machine

Kyleakahalo · 08/18/2010, 06:54 PM

Quote:

Originally Posted by booey13

I hope there's a 180 front goin on that mystery machine

not yet pimp

07/26/2010, 03:53 PM	#226
booey13 Newbie Join Date: Feb 2009 Location: Des Moines, Iowa Posts: 19	Re: the nissan picture thread Thanks guys. Yes they are battles and theyre currently not for sale. Actually just put the fogs on to try them out, I was trying to find an OEM set but that's damn near impossible. Yes they're thte cheap ones and they flop around but I don't mind them. They'll probably come off when I get a lip if I can't stiffen them up or find a clean set of the OEM's. I'm not counting on that tho... It scrapes just about everywhere I go but I have a skid plate so it's all cool. I unfortunately have to keep my car at this height...I'm terrified of heights. Oh, and the car DEFINITELY needs a spacer in the rear. Last edited by booey13; 07/26/2010 at 03:57 PM.

07/26/2010, 03:56 PM	#227
rocko JDM Lover Join Date: Feb 2010 Location: Ames, IA Posts: 73	Re: the nissan picture thread ^^^darn o well where did you pick them up from.

07/26/2010, 03:58 PM	#228
booey13 Newbie Join Date: Feb 2009 Location: Des Moines, Iowa Posts: 19	Re: the nissan picture thread I got mine from wheel trends, you can get them from a few different places. Discount tire should have them also.

07/26/2010, 04:03 PM	#229
rocko JDM Lover Join Date: Feb 2010 Location: Ames, IA Posts: 73	Re: the nissan picture thread K thanks

07/26/2010, 04:39 PM	#230
Dj Technick JDM Soldier Join Date: May 2009 Location: Des Moines, Iowa Posts: 177	Re: the nissan picture thread I think you need to lower your car more. __________________ Damn that's a good lookin' pixel car. :D

07/26/2010, 05:10 PM	#231
booey13 Newbie Join Date: Feb 2009 Location: Des Moines, Iowa Posts: 19	Re: the nissan picture thread Agreed. Just a hair in the front

07/27/2010, 12:45 PM	#233
booey13 Newbie Join Date: Feb 2009 Location: Des Moines, Iowa Posts: 19	Re: the nissan picture thread I'm on it

07/28/2010, 09:09 AM	#234
booey13 Newbie Join Date: Feb 2009 Location: Des Moines, Iowa Posts: 19	Re: the nissan picture thread My bro's s14. 18X10 +3 up front. Rears are in the works

07/28/2010, 10:46 PM	#235
MDM JDM Soldier Join Date: Aug 2009 Posts: 150	Re: the nissan picture thread Damn. Who mounted those tires most places around here wont. Shit looks sick.

07/28/2010, 11:18 PM	#236
booey13 Newbie Join Date: Feb 2009 Location: Des Moines, Iowa Posts: 19	Re: the nissan picture thread Toro tires stretched them. They pull prices out of their ass though...I've had them done anywhere form $5 to $20. Guess it depends on who's working that day. You could probably get 4 tires done for a case of beer

08/01/2010, 07:31 PM	#238
zippakilla JDM Knight Join Date: Aug 2008 Location: DSM Posts: 869	Re: the nissan picture thread No actually I did track down what was going on and the switch was PART of a HUGE clusterfuck of a problem. 1 The switch was grounding out creating a draw 2 The fans were wired into the IGN coil 12 v wire. Draw plus too much current through one wire. Wires no longer heat up. Just wish I had the brake master cylinder reservoir seal for the bottom of it. Trying to volunteer to go overseas to get outa here so the rides might be up for grabs . ... we'll see. __________________ I'm not gonna lie i ain't no michael robinson I could walk through the nicest neighborhood and get caught in a drive by. EJ8 SKY40

08/08/2010, 10:31 AM	#239
KoukiDrifters14a Newbie Join Date: Jul 2010 Location: North Lib Posts: 16	Re: the nissan picture thread My s14a http://www.facebook.com/photo.php?pi...25976854091360 http://www.youtube.com/watch?v=7lXNoQxM2wM

08/08/2010, 10:51 AM	#240
KoukiDrifters14a Newbie Join Date: Jul 2010 Location: North Lib Posts: 16	Re: the nissan picture thread Guess i'm the First With a BOOSTED S14a on JDMCIty then :) Last edited by KoukiDrifters14a; 08/08/2010 at 11:21 AM.

08/08/2010, 11:23 AM	#241
KoukiDrifters14a Newbie Join Date: Jul 2010 Location: North Lib Posts: 16	Re: the nissan picture thread Guess i'm the First With a BOOSTED S14a on JDMCIty then :)

08/18/2010, 05:58 PM	#242
Kyleakahalo JDM Soldier Join Date: Mar 2009 Location: Des Moines Posts: 209	Re: the nissan picture thread __________________

08/18/2010, 06:32 PM	#243
booey13 Newbie Join Date: Feb 2009 Location: Des Moines, Iowa Posts: 19	Re: the nissan picture thread I hope there's a 180 front goin on that mystery machine